冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-怎么正確有效的修理叉車輪轂?

怎么正確有效的修理叉車輪轂?

來源:http://nukkadh.com/ 日期:2019-08-07 發布人:admin

  近年來,隨著城市影響力的不斷增強,當地經濟發展迅速,帶動了許多產業的發展。叉車在許多建筑工地、港口和碼頭都能看到。近年來,隨著時代的進步和我國社會經濟水平的提高,叉車的使用越來越廣泛。

  In recent years, with the increasing influence of cities, the rapid development of local economy has led to the development of many industries. Forklift trucks can be seen in many construction sites, ports and wharfs. In recent years, with the progress of the times and the improvement of social and economic level in China, forklift trucks are used more and more widely.
  在叉車保養的內容中,輪轂的修理是非常重要的,所以接下來讓大家來談談如何有效的修理叉車輪轂。
  In the maintenance of forklift trucks, hub repair is very important, so let's talk about how to effectively repair the forklift wheel hub.
  但是,由于叉車的工作時間長,工作量大,磨損非常大。對于很多企業來說,他們也利用叉車維修公司來幫助。
  However, due to the long working time and heavy workload of forklift truck, the wear and tear of forklift truck is very large. For many companies, they also use forklift repair companies to help.
  1. 半軸螺栓孔內螺紋跟蹤損壞,需要固定時,堆焊后重新鉆孔攻絲。
  1. When the thread in the hole of half-shaft bolt is damaged and needs fixing, drill and tap again after surfacing welding.
  2. 叉車輪轂內外軸承座內徑磨損大于0.05mm時,采用鍍鉻方法進行修復。
  2. Chromium plating is used to repair the wear of inner diameter of inner and outer bearing seat of forklift wheel hub when the wear is greater than 0.05 mm.
濟南二手叉車
  3、如果制動轂的輪轂出現裂紋,應考慮坡口焊接的方法,焊接后調平。
  3, if the hub of the brake hub cracks, we should consider the groove welding method, leveling after welding.
  4. 與制動轂接觸的周向表面應平整。當輪轂中心線的圓周運動大于0.1mm時,應進行回轉修復。
  4. The circumferential surface in contact with the brake hub should be smooth. When the circumferential motion of hub centerline is greater than 0.1 mm, it should be repaired by rotation.
  大型港口、碼頭和建筑工地經常見到各種類型的叉車。在眾多的叉車中,直升機叉車近年來得到了廣泛的應用。此外,由于城市綜合實力的提高,近年來規模也不斷擴大。由于叉車工作時間長、工作量大,在使用過程中難免會出現一些故障。常見的問題是零件在提升時振動。
  Forklift trucks of various types are often seen in large ports, wharfs and construction sites. In many forklifts, helicopter forklift has been widely used in recent years. In addition, due to the improvement of the city's comprehensive strength, the scale has been expanding in recent years. Due to the long working time and heavy workload of forklift truck, some faults will inevitably occur in the use process. The most common problem is the vibration of parts during lifting.
  以上是叉車維修公司介紹的幾種維修叉車輪轂的有效方法。隨著叉車使用率的提高,叉車維修公司和租賃公司越來越多,所以在這里我們提醒大家在選擇叉車時要多加注意。
  Above are several effective methods of repairing forklift wheel hub introduced by forklift maintenance company. With the increase of forklift usage rate, more and more forklift maintenance companies and leasing companies, so here we remind you to pay more attention to the choice of forklift.

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场