传奇彩票

全国服务热线:15953195999
产品中心
您所在的位置:首页-新闻中心-常见问题-怎么对于叉车的底盘进行保养?

怎么对于叉车的底盘进行保养?

来源:/ 日期:2019-09-04 发布人:admin

  一般来说,叉车底盘的保养往往被认为是可有可无的,远离叉车发动机和变速箱的人们如此重视。事实上,叉车底盘配件的保养是否得当,直接关系到叉车运行的安全性•●、操控性等关键性能,不能掉以轻心。

  Generally speaking, the maintenance of forklift chassis is often considered to be indispensable. People who are far away from forklift engines and gearboxes pay so much attention to it. In fact, the proper maintenance of the chassis parts of forklift trucks is directly related to the safety and control of the operation of forklift trucks, and can not be neglected.
  及时检查主要叉车底盘部件,如叉车半轴,转向系统和制动系统,一方面,我们将严格按照叉车使用手册的规定时间操作,定期检查和维修或更换叉车齿轮油,另一方面也要检查你的观察,在日常的使用叉车,叉车司机可以在叉车停放,检查是否有漏油等,要听有同样问题的套圈,等等。
  Check the main chassis parts of forklift truck in time, such as forklift half axle, steering system and braking system. On the one hand, we will operate strictly according to the time stipulated in the forklift use manual, check and repair regularly or replace the gear oil of forklift truck. On the other hand, we should also check your observation. In daily use of forklift truck, forklift driver can park and inspect forklift truck. Check for oil spills, listen to hoops with the same problem, and so on.
  定期检查叉车刹车盘和离合器盘的磨损情况。这两种摩擦片是叉车配件的消耗品。它们在使用一段时间后就会磨损,失去原有的功能。如果不及时更换,容易造成失控或导致事故的发生。
  Periodically check the wear of forklift brake disc and clutch disc. These two friction discs are consumables of forklift parts. They will wear out after a period of time and lose their original functions. If it is not replaced in time, it will easily lead to out of control or accident.
  目前,大多数叉车制动盘制造商使用粘合剂的方法连接钢的摩擦盘,直到摩擦盘磨到最后,金属和金属之间的直接接触会发出声音,在这个时候,它可能有点晚取代叉车的摩擦盘。当用目测或测量工具测量摩擦板仍为1.5 mm时,应直接更换叉车摩擦板。更换叉车刹车片时,检查刹车泵是否漏油,检查半轴油封是否漏油。如有漏油现象,请及时更换,以免叉车在运行过程中发生刹车失灵等事故。
  At present, most forklift brake disc manufacturers use adhesives to connect steel friction discs, until the friction discs are ground to the end, the direct contact between metal and metal will make a sound, at this time, it may be a little late to replace the friction discs of forklift trucks. When the friction plate is still 1.5 mm measured by visual or measuring tools, the friction plate of forklift truck should be replaced directly. When replacing the brake pad of forklift truck, check whether the brake pump leaks oil and check whether the oil seal of half axle leaks oil. If there is oil leakage, please replace it in time to avoid accidents such as braking failure during the operation of forklift truck.
济南二手叉车
  首先,要注意叉车使用的是实心轮胎还是充气轮胎,充气轮胎压力大,充气压力过高,轮胎容易爆裂;压力过低,阻力增加,燃料消耗相应增加。还要经常检查轮胎的胎面花纹是否有尖锐的钉子•●、石子和碎玻璃,以免伤到轮胎。轮胎胎面花纹磨损到一定程度,需要及时更换轮胎。通常当花纹磨损到只有1.5 ~ 2mm时,你会发现轮胎上有一个特定的标志,不同等级的轮胎标志是不一样的,但是说明书上有说明。该换轮胎了。但如果用户使用的是实心轮胎,这是很麻烦的,只要轮胎磨损到一定程度就可以更换。
  First of all, we should pay attention to whether the forklift truck uses solid tire or pneumatic tire. The pneumatic tire has a high pressure, and the pneumatic pressure is too high. The tire is easy to burst; the pressure is too low, the resistance increases, and the fuel consumption increases accordingly. Also check tire tread patterns regularly for sharp nails, stones and broken glass to avoid injury to the tire. Tire tread pattern wear to a certain extent, it is necessary to replace the tire in time. Usually when the pattern wears down to only 1.5 - 2 mm, you will find that there is a specific mark on the tire, different grades of tire marks are different, but the instructions are stated. It's time to change the tire. But if the user is using solid tires, this is very troublesome, as long as the tires wear to a certain extent can be replaced.
  经常检查叉车底盘是否漏油。经常给驾驶台涂黄油,检查飞机轴承•●、滚针轴承是否损坏或缺油等。
  Check the chassis of forklift truck regularly for oil leakage. Often butter the bridge, check whether the aircraft bearings, needle bearings are damaged or lack of oil, etc.

  左右棋牌_左右棋牌官网www.nukkadh.com版权所有 2018济南韩工机械设备有限公司 All Rights Reserved
地址:济南市章丘区龙山街道向东3公里路北   电话:15953195999
网站:/   备案号:鲁ICP备14018186号-1  技术支持:济南诺商

 

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除!

www.nukkadh.com
友情链接:左右棋牌下载  左右棋牌APP  左右棋牌手机版  左右棋牌APP    左右棋牌