冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-內燃叉車動力不足的五個原因!

內燃叉車動力不足的五個原因!

來源:http://nukkadh.com/ 日期:2019-11-07 發布人:admin

  內燃式叉車是一種叉車,通常是一種以柴油、汽油或液化石油氣為燃料的發動機驅動的叉車。今天,我們來看看內燃叉車動力不足的五個原因:

  Internal combustion forklift is a kind of forklift, which is usually driven by diesel, gasoline or LPG engine. Today, let's look at five reasons why the internal combustion forklift lacks power:
  1. 內燃叉車在運行過程中突然發現動力不足,可能是由于調整齒輪桿卡住,無法移動到最大供油位置;或調速器運動部件卡死、調速彈簧斷裂等。
  1. During the operation of the internal combustion forklift, the power shortage is suddenly found, which may be caused by the jamming of the adjusting gear lever, unable to move to the maximum oil supply position, or the moving parts of the governor are stuck, and the speed regulating spring is broken, etc.
  燃料供應時間太早或太晚。
  The fuel supply is too early or too late.
  柴油叉車柴油發動機供油量小
  Diesel forklift diesel engine fuel supply is small
  1. 當調節噴油泵時,實驗室溫度過低或過高,雖然是根據技術規范進行調節,但在柴油機上使用時供油不足。在這種情況下,只需要調整燃料供應。
  1. When adjusting the fuel injection pump, the laboratory temperature is too low or too high. Although it is adjusted according to the technical specifications, the fuel supply is insufficient when it is used on the diesel engine. In this case, only the fuel supply needs to be adjusted.
  2. 如果柱塞聯軸器磨損,供油減少,則可適當增加供油。如磨損嚴重,應更換柱塞副,重新調整噴油泵。
  2. If the plunger coupling is worn and the oil supply is reduced, the oil supply can be increased properly. If the wear is serious, replace the plunger pair and readjust the fuel injection pump.
濟南二手叉車
  四、內燃叉車柴油機油腔內存在空氣,產生空氣阻力,減少供油。發動機工作時,應依次松開燃油泵的排氣螺絲。
  4. There is air in the diesel engine oil chamber of internal combustion forklift, which produces air resistance and reduces oil supply. When the engine is working, loosen the exhaust screw of the fuel pump in turn.
  5. 內燃叉車輸油泵供油不足,會因輸油泵磨損、細濾器堵塞、回油閥失靈而減少供油。
  5. If the oil supply of the oil pump of the internal combustion forklift is insufficient, the oil supply will be reduced due to the wear of the oil pump, the blockage of the fine filter and the failure of the return valve.
  我公司的濟南二手叉車產品設計科學而合理,價格優惠,質量過硬,經久耐用,長期受到廣大客戶的好評與贊譽,是客戶不錯的選擇。
  Our company's second-hand forklift products are scientific and reasonable in design, favorable in price, excellent in quality and durable in use. They have been praised and praised by our customers for a long time and are good choices for our customers.

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场