冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-防止電動叉車線路燒壞的措施!

防止電動叉車線路燒壞的措施!

來源:http://nukkadh.com/ 日期:2020-04-14 發布人:admin

  電動叉車,顧名思義,是以電池為主導核心控制器的叉車!另外,為了給電動叉車更多的功能,而要實現這些功能,往往需要更多的線束來控制。那么,一旦電動叉車長時間工作或預報高溫天氣,要防止電動叉車電路線束燒壞的措施,你是很有必要知道的!

  Electric forklift, as the name implies, is a forklift with battery as the core controller! In addition, in order to provide more functions for electric forklift, and to achieve these functions, more harnesses are often needed to control. Then, once the electric forklift works for a long time or forecasts the high temperature weather, it is necessary to know the measures to prevent the electric forklift circuit harness from burning out!
  1. 在使用過程中,經常會發現一些電動叉車布線混亂,冗余電線和外露電線較多,隨機布線也較為常見。結果導致整車線路混亂,往往導致人為的線路故障,難以發現。嚴重時會發生鐵短路,燒毀電氣設備和線束,造成火災事故,直接影響叉車的安全運行。
  1. In the process of use, it is often found that some electric forklift cables are disordered, redundant wires and exposed wires are more, and random wiring is also more common. As a result, the whole vehicle line is in disorder, which often leads to artificial line fault, which is difficult to find. In serious cases, iron short circuit will occur, electrical equipment and wiring harness will be burned, resulting in fire accidents, which will directly affect the safe operation of forklift.
  2,在維護叉車電路線束,維修必須遵守規范,按照叉車低線顏色和代碼的數量和布置標準連接,不能單獨見面時,故障沒有排除電源線,或一條線段破壞,無論顏色,無論厚度,只是隨便,會人為地增加車輛電路線束混亂,失敗的后果。在更換保險絲之前,應按要求關閉和更換所有電氣設備和點火開關。
  2. In the maintenance of forklift circuit harness, the maintenance must comply with the specification, connect according to the number and layout standard of low line color and code of forklift. When it is not able to meet alone, the fault does not eliminate the power line, or a line segment is damaged, regardless of color, regardless of thickness, just casually, it will artificially increase the chaos of vehicle circuit harness and the consequences of failure. Before replacing fuses, turn off and replace all electrical equipment and ignition switches as required.
濟南二手叉車
  3.如果更換后的保險絲再次燒壞,說明系統有短路,應仔細檢查并排除故障后更換系統。有電源總開關的叉車,停車后應關閉電源總開關。定期檢查、維護和調整電路熔絲,必要時更換新部件。
  3. If the replaced fuse burns out again, it means that there is a short circuit in the system. Check carefully and remove the fault before replacing the system. For forklift with main power switch, turn off the main power switch after parking. Check, maintain and adjust circuit fuse regularly, and replace new parts if necessary.
  電動叉車電路故障多為隱蔽故障,多由電線引起。叉車電源線短路是最常見的線路燒損,電源線不使用短路過載保護裝置。
  Most of the circuit faults of electric forklift are hidden faults, which are caused by wires. Forklift power line short circuit is the most common line burn, power line does not use short circuit overload protection device.

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
冷门赚钱行业 網站:http://nukkadh.com/   備案號:  技術支持:

 

冷门赚钱行业【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场