冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-叉車倒車的操作技巧與要求有哪些?

叉車倒車的操作技巧與要求有哪些?

來源:http://nukkadh.com/ 日期:2020-07-31 發布人:hangong

1、叉車倒車駕駛的操作技巧

1. Operation skills of forklift truck reversing driving
1)叉車后倒時,應先查看車后情況,并選好倒車目標.
1) When the forklift truck is backward, check the situation behind the truck and select the reversing target
2)倒車時,可以注視后方倒車、注視側邊倒車、注視后視鏡倒車.目標選擇以叉車縱向中心線對準目標中心、叉車車身邊線或車輪靠近目標邊緣.
2) When reversing, you can look at the rear, the side and the rear-view mirror. The target selection is to align the target center with the longitudinal center line of the forklift truck, or the side line of the forklift truck body or the wheels close to the target edge
3)掛上倒檔起步后,要控制好車速,注意周圍情況,并隨時修正方向.
3) After starting with reverse gear, control the speed, pay attention to the surrounding conditions and correct the direction at any time
2、叉車倒車駕駛操作要求
2. Operating requirements of forklift truck reversing driving
1)叉車倒車時,應先觀察好周圍環境,必要時應下車查看.
1) When reversing the forklift, you should first observe the surrounding environment and get off to check if necessary
            濟南叉車租賃
2)直線倒車時,應使后輪保持正直,修正時要少打少回.
2) When reversing in a straight line, the rear wheels should be kept straight. When correcting, the rear wheels should be turned back less
3)曲線倒車時,應先看清車后情況,在具備倒車條件下方可倒車.
3) When reversing on a curve, you should first see the situation behind the car, and then you can reverse when you have the conditions for reversing
4)倒車轉彎時,在照顧全車動向的前提下,還要考慮到叉車后輪為輪向輪的特點,注意后內側車輪及外輪向輪是否會駛出路外或碰及障礙物.在倒車過程中,內前輪應盡量靠近樁位或障礙物,以便及時修正方向避讓障礙物.
4) When reversing and turning, on the premise of taking care of the trend of the whole vehicle, it is also necessary to consider the characteristics of the rear wheel of the forklift truck as the wheel direction wheel, and pay attention to whether the rear inner wheel and the outer wheel steering wheel will drive out of the road or touch the obstacles. In the process of reversing, the inner front wheel should be as close to the pile position or the obstacle as possible, so as to correct the direction and avoid the obstacles in time
溫馨提示:
reminder:
1)叉車后倒時,應先查看車后情況,并選好倒車目標.
1) When the forklift truck is backward, check the situation behind the truck and select the reversing target
2)應特別注意外輪差,防止外后輪出線或刮碰障礙物.
2) Special attention should be paid to the difference between the outer wheels to prevent the outer rear wheels from leading out or scratching obstacles
3)曲線倒車時,外輪向輪盡量靠近外側邊線行駛,避免內側刮碰或壓線.
3) When reversing on a curve, the outer wheel should be driven as close as possible to the outer side line to avoid the inner side scratching or line pressing
4)轉動方向盤、回方向盤的時機和速度.
4) The timing and speed of turning and returning the steering wheel

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
網站:http://nukkadh.com/   備案號:  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场