冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-叉車維修硬件如何進行自我診斷?

叉車維修硬件如何進行自我診斷?

來源:http://nukkadh.com/ 日期:2018-11-26 發布人:admin

叉車維修技藝按一般來講,叉車按動力分為內燃叉車和電動叉車。內燃叉車以內燃機為動力,其功率剛勁、實用界線廣,缺陷是排放和噪音污染較大,對人類安康風險較大。為升高產物的節能功效和知足日漸尖酸的環保要求,重點研究從下降發動機排放、升高液壓體系效率和減振、降噪等方面人手。

  Generally speaking, forklift maintenance technology is divided into diesel forklift and electric forklift according to power. Internal combustion forklift truck is powered by internal combustion engine. Its power is rigid and its practical boundary is wide. Its defect is that the emission and noise pollution are bigger and the risk to human health is bigger. In order to improve the energy-saving efficiency of the products and meet the increasingly acidic environmental protection requirements, the research focuses on reducing engine emissions, improving the efficiency of hydraulic system, reducing vibration and noise, etc.
  叉車維修硬件如何進行自我診斷
  How to Self-diagnose Forklift Maintenance Hardware
  能夠一定,排放少、噪音小的叉車必然遭到歡迎。電瓶叉車、天然氣、液化石油氣等燃料叉車必將會得到更進一步的發展。叉車租憑、叉車配件、叉車維修、叉車買賣等使用界線很廣且節能環保、價值不貴等都據有很大優點,都是叉車行業發展趨向長久的有用策略。
  To a certain extent, forklift trucks with less emission and less noise will be welcomed. Fuel forklift trucks such as battery forklift trucks, natural gas and liquefied petroleum gas will surely get further development. Forklift rental, forklift spare parts, forklift maintenance, forklift sales and other use boundaries are very wide and energy-saving, environmental protection, low value and so on have great advantages, are forklift industry development trends to long-term useful strategies.
  電動前移式叉車擁有機動靈敏、獨攬輕巧、無污染、低嗓音等特色。其融合了電動堆垛機與平均歡叉車的優點.當門架前伸至頂端,荷載重心落在支點外側.此時相等干平均,叉車.當門架實足回籠后.荷載宜心落在支點內側,此時即相等干電動堆垛機。
  Electric Forklift Forklift has the characteristics of agility, lightweight, pollution-free, low voice and so on. It combines the advantages of electric stacker and average forklift truck. When the portal frame reaches to the top, the load center falls outside the fulcrum. At this time, it is equally dry and average, forklift truck. When the portal frame returns to the cage fully, the load falls comfortably on the inside of the fulcrum, which is equivalent dry electric stacker.
  這兩種性能的融合.使得在包管獨攬靈敏性及高荷收性能的同時,體積與自孟不會增添不少.管制儉省功課空間,大大升高了土地的利用率。因而實用于輕工、煙李、紡織、食物,超市等行業的狹小空間完畢物料傲運和堆垛功課。是現代化倉儲必不可少的設備之一。也是天下各大又車制造商競爭焦點之一。
  The combination of these two performances makes it possible to control the sensitivity and high revenue performance without increasing the volume and the homework space, which greatly increases the land utilization rate. Therefore, it can be used in light industry, plum and tobacco, textile, food, supermarket and other industries to complete material haughty transportation and stacking homework. It is one of the indispensable equipment for modern warehousing. It is also one of the competition focuses of the world's major automobile manufacturers.
  完成以微處理器為核心的機電工程液一體化是將來叉車管制體系發展的主目標,即以微處理器為核心,管制由片面管制向網絡化目標發展,使整車維持勞動形態,完成叉車的智能化功課。關于電動車輛,傳統的電阻調速管制器已被鐫汰,而新式晶體管因其門極驅動電流小,并聯管制特性好且有軟、硬件自動守護和硬件自診斷性能等優點,得到平凡選用。串勵和他勵管制器仍是商場的主導產物,交流管制技藝則處于起步階段。
濟南叉車租賃
  The main goal of the future forklift truck control system is to achieve the integration of mechanical, electrical and hydraulic engineering with microprocessor as the core. That is to say, with microprocessor as the core, the control will develop from one-sided control to networked control, so that the whole truck can maintain its working form and complete the intelligent work of the forklift truck. With regard to electric vehicles, the traditional resistance speed regulator has been eliminated, while the new transistor has been widely used because of its low gate drive current, good parallel control characteristics, automatic guard of software and hardware, and self-diagnostic performance of hardware. Series excitation and other excitation controllers are still the main products of shopping malls, while AC control technology is still in its infancy.
  包管駕駛員的平安一貫是叉車設計職員重點研究的問題。除泊車、行車制動,前傾自鎖,下落限速等基礎平安對策外,經過裝配性能齊全的監控體系、動力制動體系、防側翻體系,和選用電控、液壓、機器3套獨立制動體系,大大升高了整車的平安可靠性。
  Safeguarding the safety of drivers has always been a key issue for forklift design staff. In addition to basic safety measures such as parking, braking, forward tilt self-locking and speed limit, the safety and reliability of the whole vehicle has been greatly improved by means of complete monitoring system, power braking system, anti-rollover system, and three independent braking systems including electronic control, hydraulic and machine.
  同時,電子技藝的發展與應用,使對叉車平安性研討向智能化目標發展。濟南叉車租賃以為在升高可維護性方面,偏重拆裝簡單化,部件組織化,加油集中化,檢驗監控化,改良部件的易靠近性,和盡量節減需維修的名目更多相關內容可以點擊咨詢:http://nukkadh.com
  At the same time, the development and application of electronic technology make the research on forklift safety develop to the goal of intellectualization. Wuxi Forklift Maintenance Company believes that in terms of improving maintainability, it pays more attention to simplification of disassembly and assembly, organization of components, centralization of refueling, monitoring of inspection, improvement of accessibility of components, and reducing the number of items requiring maintenance as much as possible. Click to consult: http://nukkadh.com.
 

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
冷门赚钱行业 網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场