冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-濟南叉車正確的保養方法!

濟南叉車正確的保養方法!

來源:http://nukkadh.com/ 日期:2019-02-11 發布人:admin

  一,首先對于制動器、轉向機構、操縱機構、警示裝置、燈光和一些基本的保護裝置必須保持在正常狀態,維持正常的工程作業。

  Firstly, the brake, steering mechanism, control mechanism, warning device, lighting and some basic protective devices must be kept in normal condition to maintain normal engineering operation.
  二,對于對于起升和傾斜機構的所有部件及構件必須定期檢查,還有一些安全防護架和安全裝置必并保持安全作業狀態。
  Secondly, all parts and components of lifting and tilting mechanism must be inspected regularly, and some safety protective shelves and safety devices must be kept in safe working state.
  三,對于制動液壓系統都必須定期檢查和維護,要經常檢查油缸、閥和其他液壓元件,以確保內漏和外漏不會發展到危險的程度。還要檢查內燃車輛的排氣系統、燃油泵是否有損壞和滲漏。
  Third, the brake hydraulic system must be inspected and maintained regularly, and the cylinders, valves and other hydraulic components should be inspected regularly to ensure that internal and external leakage will not develop to a dangerous level. Also check the exhaust system of internal combustion vehicles, fuel pump whether there is damage and leakage.
  四,不管是電動叉車還是內燃叉車,檢查和維護蓄電池、電動機等裝置都是非常重要的,使其處于良好狀態,特別要注意電氣絕緣狀態。
  Fourthly, whether it is an electric forklift or an internal combustion forklift, it is very important to inspect and maintain the battery, motor and other devices, so that they are in good condition, and pay special attention to the electrical insulation.
濟南叉車租賃
  五,對于一些外部的零件,例如充氣輪胎輪惘的損壞程度,檢查實心輪胎和金屬輪箍或輪輛的粘接情況。必要時,應清除輪胎踏面的雜質。對于外部的一些標牌,標簽要確保字跡清晰。
  Fifthly, for some external parts, such as pneumatic tire wheels, check the bonding between solid tires and metal tyres or wheels. If necessary, the tread impurities should be removed. For some external signs, the label should ensure clear handwriting.
  六,檢查燃油系統有無滲漏及所有配件是否完好。燃油系統有滲漏時,車輛必須離開作業現場,只有將所有的滲漏處修補完好之后,車輛才能重新投人使用。
  Sixth, check whether the fuel system is leaking and whether all parts are in good condition. When there is leakage in the fuel system, the vehicle must leave the work site. Only after all the leakage is repaired, the vehicle can be put into use again.
  以上基本就是整個維修保養的全部了,當然具體的情況還應該根據叉車的具體使用情況來決定。經常更換易損的零部件是保證叉車正常作業的前提,但是必須注意的是,叉車的使用者,不得輕易改裝叉車,或者隨便在叉車上添加裝置。因為個人對于叉車的構造不能精準把控,所以上面的做法很容易導致叉車的作業能力下降甚至作業安全隱患。
  The above is basically the whole maintenance, of course, the specific situation should also be based on the specific use of forklift trucks to decide. Frequent replacement of vulnerable parts is the premise to ensure the normal operation of forklift trucks, but it must be noted that users of forklift trucks should not easily refit forklift trucks or add devices to forklift trucks. Because the structure of the forklift truck can not be accurately controlled by individuals, the above approach can easily lead to the decline of the operation capacity of the forklift truck and even potential safety hazards.
  更多濟南叉車租賃的相關內容可以點擊我們的官網進行咨詢:http://nukkadh.com,我們將竭誠為您服務!
  More information about Jinan forklift truck rental can be consulted by clicking on our official website: http://nukkadh.com, we will serve you wholeheartedly!

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
冷门赚钱行业 網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场