冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-常見問題-前移式電動堆高車如何換擋?

前移式電動堆高車如何換擋?

來源:http://nukkadh.com/冷门赚钱行业 日期:2019-02-27 發布人:admin

  前移式電動堆高車在運行過程中由于不同工況的要求,換擋也是相當頻繁的。能否及時、準確、迅速地換擋對于延長叉車的使用壽命、提高作業效率、節省燃料有著非常密切的關系。

  Due to the requirements of different working conditions, the shift of forward-moving electric stacker high truck is quite frequent. Whether shifting can be timely, accurate and rapid has a very close relationship with prolonging the service life of forklift trucks, improving operational efficiency and saving fuel.
  1、加檔
  1. Add files.
  前移式電動堆高車行駛過程中從低速檔換高速檔時,只要在道路條件允許的情況下需要逐漸踏下加速踏板提高車速,然后立即抬起加速踏板,同時迅速踏下離合器踏板,將變速桿置于空擋位置,接著抬起離合器踏板,再次踏下,迅速將變速桿推入高檔位置。
  When moving from low to high speed in the course of driving, as long as the road conditions permit, it is necessary to step down the acceleration pedal gradually to increase the speed, then immediately lift the acceleration pedal, and at the same time quickly step down the clutch pedal, put the transmission rod in the neutral position, then lift the clutch pedal, step down again, and quickly push the transmission rod into the high-grade position.
  2、減擋
  2, reduce gear
  電動堆高車從高速檔換為低速檔時,抬起加速踏板的同時踏下離合器踏板,將變速桿移入空擋,接著抬起離合器踏板隨即踏下加速踏板,再迅速踏下電動堆高車離合器踏板,將變速桿置于低檔位置后,松開離合器踏板,同時踏下加速踏板,使叉車以低速行駛。
  When the electric stacker truck changes from high-speed to low-speed, the accelerator pedal is lifted while the clutch pedal is stepped down, the transmission rod is moved into neutral gear, then the clutch pedal is lifted and the accelerator pedal is stepped down immediately, then the clutch pedal of the electric stacker truck is stepped down rapidly. After the transmission rod is placed in the low-speed position, the clutch pedal is loosened, and the accelerator pedal is stepped down at the same time, so that the forklift truck travels at low speed.
濟南二手叉車
  3、換擋時注意事項
  3. Notices in Shifting
  離合器要分離徹底,對變速桿不得強硬退拽。方向逆變時必須待叉車停穩后,方可換擋,以免損壞機件。要根據車速及時換擋,切記電動叉車不可長時間用低速檔作業。手握變速桿時,應以掌心貼住球頭,五指握向手心,球頭自然地握在掌心。操縱變速桿,兩眼應注視前方,左手握穩快轉手柄,在右腳松抬加速踏板的同時,左腳踩下離合器踏板,右手用手腕及肘關節的力量準確地將其推入或拉出某一選定的檔位。變速桿移入空擋后,不要來回移動,不得移頭查看,切忌強拉、硬推,以免方向跑偏或使齒輪磨損。
  The clutch should be completely separated and the transmission rod should not be dragged back. When the direction is reversed, the forklift must be stopped before shifting, so as not to damage the parts. To shift gears in time according to the speed, remember that electric forklift trucks should not work in low gear for a long time. When grasping the transmission lever, the ball head should be held close to the palm of the hand, five fingers to the palm, and the ball head should be held naturally in the palm of the hand. To control the transmission lever, two eyes should be fixed on the front. The left hand should hold the fast turning handle firmly. While the right foot lifts the accelerating pedal loosely, the left foot should step on the clutch pedal. The right hand should properly push or pull the clutch pedal into or out of a selected gear with the strength of the wrist and elbow joint. After the transmission rod moves into neutral gear, do not move back and forth, do not move the head to check, do not pull, push hard, in order to avoid direction deviation or gear wear.
  如果您對濟南二手叉車等產品有需求歡迎聯系咨詢:http://nukkadh.com
  If you are in need of used forklift trucks in Jinan, please contact us at http://nukkadh.com.

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场