冷门赚钱行业

全國服務熱線:15953195999
產品中心
您所在的位置:首頁-新聞中心-新聞動態-叉車在裝卸貨物的時候注意什么?

叉車在裝卸貨物的時候注意什么?

來源:http://nukkadh.com/冷门赚钱行业 日期:2019-01-25 發布人:admin

  近日在網上有很多關于叉車事件的報道,由此可見叉車的操作安全是很重要的,尤其是在裝卸貨物的時候。下面山東叉車廠家就給大家科普一下山東叉車在裝卸貨物的時候要注意哪些事項:

  Recently, there are many reports about forklift incidents on the Internet, which shows that the safety of forklift operation is very important, especially when loading and unloading goods. Next Shandong forklift truck manufacturer Henghua Logistics will give you a scientific popularization of Shandong forklift truck when loading and unloading goods to pay attention to what matters:
  1、山東叉車在叉載物品時,應按需調整兩貨叉間距,使兩叉負荷均衡,不得偏斜,物品的一面應貼靠擋貨架,叉載的重量應符合載荷中心曲線標志牌的規定。
  1. When forklifting goods, Shandong forklift truck should adjust the spacing between two forks according to need so as to balance the load of two forks and not to deviate. One side of the goods should be attached to the shelf, and the weight of forklift should conform to the requirements of the load center curve sign.
  2、載物高度不得庶擋駕駛員的視線。
  2. The height of the load must not obstruct the driver's sight.
  3、在進行物品的裝卸過程中,必須用制動器制動叉車。二手叉車的技術參數是用來表明叉車的結構特征和工作性能的。主要技術參數有:額定起重量、載荷中心距、大起升高度、門架傾角、大行駛速度、小轉彎半徑、小離地間隙以及軸距、輪距等。
  3. Brakes must be used to brake forklift trucks during loading and unloading. The technical parameters of used forklift trucks are used to show the structural characteristics and working performance of forklift trucks. The main technical parameters are: rated lifting weight, load center distance, maximum lifting height, gantry inclination, maximum speed, minimum turning radius, minimum ground clearance, wheelbase, wheelbase, etc.
濟南二手叉車
  4、貨叉車接近或撤離物品時,車速應緩慢平穩,注意車輪不要碾壓物品、木墊等,以免碾壓物飛起傷人。
  4. When the forklift truck approaches or evacuates the goods, the speed should be slow and steady. Pay attention to the wheel not to crush the articles, wooden mats, etc., in order to avoid the crushing objects flying up and hurting people.
  5、用貨叉叉取貨物時,貨叉應盡可能深地叉入載荷下面,還要注意貨叉尖不能碰到其它貨物或物件。應采用小的門架后傾來穩定(解釋:穩固安定;沒有變動)載荷,以免載荷向后滑動。放下載荷時,可使門架小量前傾,以便于安放載荷和抽出貨叉。
  5. When picking up goods with forks, the forks should be placed as deep as possible under the load, and the fork tip should not touch other goods or objects. Minimum portal tilt should be used to stabilize the load (explanation: stable stability; no change) so as to prevent the load from sliding backwards. When the load is lowered, the portal frame can be tilted forward slightly so as to place the load and pull out the fork.
  山東叉車在裝卸貨物的時候要注意哪些事項?
  What matters should Shandong forklift truck pay attention to when loading and unloading goods?
  6、禁止高速叉取貨物和用叉頭缶堅硬物體碰撞。
  6. It is forbidden to fork goods at high speed and collide with hard objects with forks.
  7、叉車作業時,禁止人員站在貨叉上。
  7. When a forklift truck is working, it is forbidden to stand on a fork.
  8、叉車叉物作業,禁止人員站在貨叉周圍,以免貨物倒塌傷人。
  8. Forklift truck forklift operations, forbidden personnel standing around the forklift, in order to avoid cargo collapsing and injuring people.
  9、禁止用貸叉舉升人員從事高處作業,以免發生高處墜落事故。
  9. It is forbidden to use loan fork to lift personnel to engage in high-altitude operations in order to avoid High-altitude Falling accidents.
  10、不準用制動慣性溜放物品。
  10. No braking inertia is allowed to slide articles.

版權所有 ? 2018濟南韓工機械設備有限公司 All Rights Reserved
地址:山東省濟南市章丘區龍山街道辦事處東3公里路北韓工叉車濟南4S店   電話:15953195999
網站:http://nukkadh.com/   備案號:魯ICP備14018186號-1  技術支持:

 

【BENZHANTUPIANJUNYOUWANGZHANSUOYOUFANGTIGONG,BUFENTUPIANLAIYUANYUWANGLUO,RUWUYIZHONGQINFANLEMOUMEITIHUOGERENDEZHISHICHANQUAN,QINGLAIXINHUOLAIDIANGAOZHI,BENWANGZHANJIANGLIJISHANCHU。】

开心生肖 贵州11选5开奖结果 福建11选5走势图 广东11选5开奖结果 湖北11选5开奖结果 正规捕鱼游戏 正规捕鱼游戏 万丰国际赌场